How do I add vents and sensors to a different room?

If you have decided that a vent or sensor (or both) would be better served if installed another room, Ecovent gives you the flexibility to pair them elsewhere. To do this, follow these steps:

1. Disconnect the device(s) from its currently assigned room

  • Open Ecovent App menu
  • Open System Settings
  • Open Add Room option to go into Room Setup page
  • Tap the room icon that the device is currently assigned to
  • Under "Devices" section, disconnect the intended device(s) (*note: Device ID can be found on label attached to device; see photo attachment)
  • Finish Room Setup and exit out of page

2. Add device to new intended room

  • Open the setup page of the room you want to install the device(s)
  • Under "Devices" section, press the "Add Sensor" or "Add Vent" depending on which device you are trying to add to the room
  • The app will walk you through the normal pairing process
  • Finish Room Setup

3. Complete 

  • On the Room Setup page, tap "Done With Room Setup" button
  • Choose "Start Ecovent" option
Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

0 Comments

Article is closed for comments.